Rain Water Harvesting Systems Available

Killarney Plastics Ltd are pleased to offer 2 different types of Rainwater Harvesting Systems to suit all of your rainwater harvesting requirements. We offer underground & overground tanks as standard, with the overground tanks being an attractive option for existing installations like schools, factories etc where a small hard standing area may be available. With overground systems, there are no tank installation costs to the customer, except for a conrete base or RSJ base for the tank, as we assemble the tank on site. Both options include for the following:

  • Rainwater Harvesting Tank (underground or overground)
  • Tri-Cel VF filter, suitable for roof areas upto 350m2. (Larger filters available).
  • Dip pipe with Calmed inlet connection & Overflow siphon
  • On site commissioning of the system by trained Killarney Plastics staff

1. The basic option has a Rainwater tank with a submersible pump, pumping directly to a header tank. The pump is supplied as a complete set with a starting and running device, a system against dry running and a 20 m lead cable with a plug and a watertight connector that allows for easy removal. Not included are non return valves, ball cocks etc. There is 4” duct work required also.

  • Pump (standard pump: Max (Q): 25 l/min (1,5 m3/h) - Max (H): 50,2 m - Water Cooled H3 ZDS Motor: kW 0.25/HP 0.33). Larger pumps on request.

2. The superior option consists of a Rainwater tank and a Tri-Cel Rain Centre, pumping directly into the services or to a header tank. This system requires very little onsite installation, just plug in the rain centre and very little plumbing connections, a 1” BSP connection to the services and a ¾ “ BSP mains connection. There is 4” duct work required also.

  • Tri-Cel Rain Centre: Pump, tank contents gauge, pressure switch, dry-run protection mains in, rainwater outlet, pressure gauge, capillary tube for pressure indication, float valve inlet for mains back-up, 3-way valve, mains back-up water tank, maximelder connection (float switch), digital level indicator.
  • TCRC Tank for housing the Tri-Cel Rain Centre with lockable cover and vents.
  • Floating suction filter with hose.

Why should you choose the superior option?

  • It has the Tri-Cel Rain Centre.

What is the Tri-Cel Rain Centre?

  • This is a factory assembled, rainwater harvesting package system.
  • Everything that you need is included in it. (List in blue below)
  • The only plumbing required, is a 1" BSP connection to the services and a ¾" BSP mains connection.
  • No messing with floats, ball cocks, non-return valve, solenoid valves etc.
  • No special ballcock design required.
  • This will saves you hundreds of euro, by reducing on site work.
  • This eliminates the need for special engineering design work. We did it already.